MILLERS & CROCKERS

AMERICA AT IT'S FINEST
Yes sir,
No leaks.
No electronics.
No sparkle paint.
No braking your foot starting.
Quiet.
P.C.
I'm moving on baby...


Who am I kidding, I know I am a hypocrite...
I wish I could, But I am an addict, & just can't leave the heavy pigs behind...
FOR REAL! This is some fine wood work with 1st rate provenance.
They both take enough space for a bike... which take precedence.
Any Roller looking for a unique piece for trade... lets see what you got!

Pic: Sophisticated-Simplicities


One more painting I made with same Girl .
(The Three Graces: 200x120cm Oil & Acrylic on canvas. 2002)
The Painting is unfortunately SOLD

There is at least 10+ on that disgusting gut of mine!
.

Paul d'Orléans is the absolute Connoisseur, a true historian. PdO knows all the machines, knows where to find the rarest pieces and owned himself more than 200 motorcycles. Paul D'Orléans is the one and only : the Vintagent.

I was recently asked by the Southsiders M.C. to contribute to their novel website project, a series of 'Favorite 5' motorcycles of collectors, enthusiasts, and builders. One might think it difficult to determine such a short list from the endless stream of fantastic motorcycles through history, and it did take a bit of editing, but surprisingly little actually. My criteria are strictly personal, no claims are made that these are the best, most important, technically innovative, or beautiful bikes Ever. But to me, they are the most compelling of all, and I will never own any of them (well, the Guzzi is possible, although fakes are rampant). In chronological order:



1. 1914 Peugeot M500 dohc twin-cylinder, 500cc
In an era when most motorcycles had no brakes and atmospheric inlet valves, when horses were more common than powered vehicles, when paved roads were very rare, Peugeot delivered a machine with technical specification from outer space; a parallel twin with gear-driven double overhead camshafts. Astounding, shocking and not a one-off; they continued to develop this machine for racing until 1920, when the original Ernest Henry design was revamped with gears alongside the engine (which greatly simplified maintenance) and a 3-speed gearbox. None of these early machines have survived.


2. 1925 Moto Guzzi C4V 500cc ohc
The very first Guzzi built in 1920 was an ohc machine, the GP1 (Guzzi/Parodi, the designers), and in 1924 the overhead-cam laid down single cylinder engine returned as a purpose-built racer, the Corsa Quattro Valvole ('racing 4 valve'), using shaft-and-bevel drive to the single ohc. Winning the European championship first time out, the C4V was good for near 100mph, and development gave 32hp. Guzzi produced the machine in small numbers, and it's my favorite flat-tank motorcycle, period, looking fast from any angle.


3. 1929 AJS ohc v-twin, 990cc
Built for an attempt at the Motorcycle Land Speed Record, AJS used two of their 'K' series top ends with chain-driven single ohc, on a common crankcase, with a third chain drive to the magneto at the front of the engine. By integrating all 3 chains thus, they created a truly dreamy powerplant; visually balanced, with more than a hint of technical finesse. The long tapered tank and otherwise spindly 1920s running gear make this bike one of my all-time favorites. It made 130mph, not quite fast enough, and was developed further in 1933 with a supercharger, which added serious machismo, but lost the delicate beauty of the original. The bike lives in the National Motorcycle Museum in England now.


4. 1934 CNA/Rondine supercharged, watercooled, dohc 4-cyl 500cc
The bloodline of this amazing four-cylinder racer start in 1922, with a sohc air-cooled four, designed by Carlo Gianini and Piero Remor, under the GRB name. The basic machine was developed over the next 35 years, changing ownership via OPRA and Rondine, eventually becoming the world-championship Gilera Four postwar. This watercooled and supercharged version was designed in '33 by Gianini and Piero Taruffi, produced 60hp @ 8500rpm, and won races immediately at the Tripoli GP, and took the flying mile World Speed Record for 500cc at 152mph. The atypical design solutions for laying out engine, frame, cooling, and suspension make for a futuristic vision of Motorcycling, even though this particular dream died out with WW2.


5. 1952 NSU Rennmax 250cc dohc twin.
While NSU experimented with two and four-cylinder racers pre- and post-war, with variable success, it all came together in 1953 with the Rennmax, which came to completely dominate 250cc GP racing in the next few years. Designed by Ewald Praxl and Walter Froede, the engine developed 36.8hp at 11.2k rpm, good for 131mph, and weighed only 117kg (270lbs). Its performance was astounding in the day, with utter reliability. The design of the shaft-and-bevel dohc twin-cylinder engine in its modified roadster pressed-steel frame is impeccable, while the hand-hammered aluminum bodywork is breathtakingly beautiful, the absolute pinnacle of the era.


all the best, Paul


Nice selection Paul, I agree with you, the NSU and the Peugeot are real masterpieces...
Hey, you liked that? send me your selection and rendez-vous next week !


.
.

Paul d'Orléans is the absolute Connoisseur, a true historian. PdO knows all the machines, knows where to find the rarest pieces and owned himself more than 200 motorcycles. Paul D'Orléans is the one and only : the Vintagent.

I was recently asked by the Southsiders M.C. to contribute to their novel website project, a series of 'Favorite 5' motorcycles of collectors, enthusiasts, and builders. One might think it difficult to determine such a short list from the endless stream of fantastic motorcycles through history, and it did take a bit of editing, but surprisingly little actually. My criteria are strictly personal, no claims are made that these are the best, most important, technically innovative, or beautiful bikes Ever. But to me, they are the most compelling of all, and I will never own any of them (well, the Guzzi is possible, although fakes are rampant). In chronological order:



1. 1914 Peugeot M500 dohc twin-cylinder, 500cc
In an era when most motorcycles had no brakes and atmospheric inlet valves, when horses were more common than powered vehicles, when paved roads were very rare, Peugeot delivered a machine with technical specification from outer space; a parallel twin with gear-driven double overhead camshafts. Astounding, shocking and not a one-off; they continued to develop this machine for racing until 1920, when the original Ernest Henry design was revamped with gears alongside the engine (which greatly simplified maintenance) and a 3-speed gearbox. None of these early machines have survived.


2. 1925 Moto Guzzi C4V 500cc ohc
The very first Guzzi built in 1920 was an ohc machine, the GP1 (Guzzi/Parodi, the designers), and in 1924 the overhead-cam laid down single cylinder engine returned as a purpose-built racer, the Corsa Quattro Valvole ('racing 4 valve'), using shaft-and-bevel drive to the single ohc. Winning the European championship first time out, the C4V was good for near 100mph, and development gave 32hp. Guzzi produced the machine in small numbers, and it's my favorite flat-tank motorcycle, period, looking fast from any angle.


3. 1929 AJS ohc v-twin, 990cc
Built for an attempt at the Motorcycle Land Speed Record, AJS used two of their 'K' series top ends with chain-driven single ohc, on a common crankcase, with a third chain drive to the magneto at the front of the engine. By integrating all 3 chains thus, they created a truly dreamy powerplant; visually balanced, with more than a hint of technical finesse. The long tapered tank and otherwise spindly 1920s running gear make this bike one of my all-time favorites. It made 130mph, not quite fast enough, and was developed further in 1933 with a supercharger, which added serious machismo, but lost the delicate beauty of the original. The bike lives in the National Motorcycle Museum in England now.


4. 1934 CNA/Rondine supercharged, watercooled, dohc 4-cyl 500cc
The bloodline of this amazing four-cylinder racer start in 1922, with a sohc air-cooled four, designed by Carlo Gianini and Piero Remor, under the GRB name. The basic machine was developed over the next 35 years, changing ownership via OPRA and Rondine, eventually becoming the world-championship Gilera Four postwar. This watercooled and supercharged version was designed in '33 by Gianini and Piero Taruffi, produced 60hp @ 8500rpm, and won races immediately at the Tripoli GP, and took the flying mile World Speed Record for 500cc at 152mph. The atypical design solutions for laying out engine, frame, cooling, and suspension make for a futuristic vision of Motorcycling, even though this particular dream died out with WW2.


5. 1952 NSU Rennmax 250cc dohc twin.
While NSU experimented with two and four-cylinder racers pre- and post-war, with variable success, it all came together in 1953 with the Rennmax, which came to completely dominate 250cc GP racing in the next few years. Designed by Ewald Praxl and Walter Froede, the engine developed 36.8hp at 11.2k rpm, good for 131mph, and weighed only 117kg (270lbs). Its performance was astounding in the day, with utter reliability. The design of the shaft-and-bevel dohc twin-cylinder engine in its modified roadster pressed-steel frame is impeccable, while the hand-hammered aluminum bodywork is breathtakingly beautiful, the absolute pinnacle of the era.


all the best, Paul


Nice selection Paul, I agree with you, the NSU and the Peugeot are real masterpieces...
Hey, you liked that? send me your selection and rendez-vous next week !


.
Came across this photo of the painting (Friday) I made back in 2002
(oil & acrylic 170 x 120cm) SOLD

But I remember Friday...

Next to Cali, more Vincents were sold in Argentina than Great Britain.
I spent 2 years there & it is a magical place.

My favorite automotive oil painter is a friend named Jose de la Maria. He capture motion like no one else.

This other Argentine, James Corbett, who John Reed turned me onto, uses as found found objects fro the 50's & 60's & creates wonderful sculptures...

For the money he's got me beat!







Ein tolles Video von meinen Freunden Thomas und Steffan. Am 21.08. ist es wieder soweit. "Every Lap A Thrill"

Mike "The Baron" wallpaper for your viewing pleasure.
Mike knows what it's all about.
Last Saturday I took a ride up to visit my friend Vic Salvador. It was about 140 mile round trip and a nice hot day. The old 39 EL ran great and spewed oil and smoke across the country side. Vic at 78 years old was his usual friendly ball busting self. He was working in his shop when I pulled up. I did a "Post" on him a while back. He was a Champion Hill Climber, Ice Racer etc. in the 50s and early 60s. He still rides the old WLA that he restored and "civilianized" and has another 45, a Norton and a bunch of cool old cars. Oh yeah he still flies his plane too!


Photo by: Tommaso Nervegna more HERE
I didn't walk until I was 3 and I didn't get my first Knuckle until I was 31.












Inspiration


I got this DVD from Wheels Through Time Museum some time ago. They are trying to do the same as Fred Ham did in 1937, ride a Harley Davidson Knuckle Head flat out for 24 hours!




Left is the modern Knuckle rider, Wayne "Ironman" Stanfield. The rider on the right is Fred Ham.

I got so inspired by the story that i painted and lined a Knuckle tank like the 24 hours bikes. Just in time for my brothers birth day.....Makes a nice wall piece in the work shop.












top