Showing posts with label ULH. Show all posts
Showing posts with label ULH. Show all posts

Tech Tip Springer Brake

                                This Little Tech Tip should give you at least
60% better braking power

 Here you can see the difference, OEM below, aftermarket top
Bendy Bendy time
Now they are all the same Radius


Brakes or lack of them on the wonderful kamikaze springer mechanical brake , 80% of the time they just don't get the job done , at best they just slow you down a bit , try this little trick i done after changing about every part available to man and still no brakes , i checked the OEM shoes against the aftermarket shoes & found them to have a different radius , just put them in the jaws of the vice , if you have a vice with Mick Jagger Jaws you can squeeze the shoes tighter otherwise just use a pipe or Rio bar bender to get the right radius like i did , if you haven't got any OEM Shoes as a template you can lay them in the drum, until you see that they follow the curvature of the drum, all that's needed is around a 2 cm tighter radius . man what a difference !!

Hillbilly Flatty Running Strong


Finally Got the Hillbilly Flathead breathing Today with a lot of help from my friends thanks Guys !! Engine Run in Starts next week so the HillBilly Flathead is Ready for the Journey to the Dook this Summer, Big Tommy is going to Ride her through my Home town London & onward towards the west country , with me in close pursuit on the Knucklehead
Celebrating 25 Years of Friendship, 4 Marriages & 4 kids
Ride On !!

Pontus BTW Great action Photo :)

The Green Twig Project





             
 After 25 years dismantled & crated the UL Flathead Bobber is Being Reborn
Stay tuned for The GreenTwig Project

Danish Knuckle Sandwich



Villys Three in a Bed !!! One word = BEAUTIFUL
Info +  Photos
SOLD

Slowly but Surely HB


The Hillbilly Bobber is moving in the right direction Wiring & Clutch Left.

Head Job Done



Always Anneal copper gaskets , & after the first run re-tighten all head bolts.
top